Modulo Sensor De Movimiento Pir Para Arduino Y Proyectos


modelo:  HC-SR501


IDEAL PARA PROYECTOS DE ELECTRONICA, ARDUINO, RASPBERRY LISTO PARA CONECTAR A TU PROTOBOARD




Descripción Tecnica Detallada del fabricante


Product Type: HC--SR501 Body Sensor Module 
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: <100 ° cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Features:
1, the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic
delay off high, output low.
2,the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or
light intensity without induction.
3, the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises
to 30 ~ 32 ¿, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4, two trigger mode: (can be selected by jumpers)
a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically
become low from high;
b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range
activities, its output will remain high until after the delay will be left high to low (sensor module review
Measured activities of each body will be automatically extended after a delay time, and the final event of
the delay time Starting point of time).
5, with induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output
(high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor
does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval
between the work produced can be applied to detect the interval Products; also inhibit this function during load
switching for a variety of interference. (This time can be set at zero seconds - Tens of seconds).
6, the working voltage range: the default voltage DC4.5V-20V.
7, micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products.
8, the output high level signals: types of circuits can be easily and docking.


Escribir Opinión

Favor de conectarse o registrarse para Opinar

Modulo Sensor De Movimiento Pir Para Arduino Hc-sr501

  • Código de Producto: Modulo Sensor De Movimiento Pir Para Arduino Hc-sr501
  • Existencia: Disponible
  • 140.00BsS


Productos relacionados

Arduino Conector Pin Header 1x40 Pines 10cm Protoboard Pcb

Arduino Conector Pin Header 1x40 Pines 10cm Protoboard Pcb

Conector Pin Header 1x40 Pines 10cm Protoboard PcbIdeal para proyectos de electronica, arduino, tarj..

15.00BsS

Arduino Pro Mini Atmega328 5v Con Pines Mas Pequeño Que Nano

Arduino Pro Mini Atmega328 5v Con Pines Mas Pequeño Que Nano

Arduino Pro Mini ATmega328 5VIncluye los pines para soldarlos (no obligatoriamente dependiendo de lo..

275.00BsS

Etiquetas: Modulo Sensor De Movimiento Pir Para Arduino Hc-sr501